What are the advantages of magnetic suspension blower produced by Jiangsu Weigu Fluid Technology?

The following is an introduction to the advantages of the magnetic levitation blower produced by Jiangsu Weigu Fluid Technology. Our magnetic levitation blower usually has the following advantages:

energy-efficient

Low energy loss: magnetic bearing technology is adopted, so that there is no mechanical contact and friction between the rotor and the stator when rotating, which eliminates the energy loss caused by friction of traditional mechanical bearings and greatly improves the energy conversion efficiency.

High-efficiency motor drive: equipped with high-efficiency permanent magnet synchronous motor, its efficiency can reach more than 96%, and the impeller is directly connected with the shaft, and the power transmission efficiency can reach 100%, further improving the energy efficiency of the whole machine.

Low noise: Because the magnetic bearing eliminates mechanical friction, there is no noise caused by mechanical contact and friction when the fan rotates. The main noise comes from air flow, and the overall noise is usually less than 80dB. Compared with the traditional Roots blower and other equipment with noise value of about 100-110dB, the noise pollution is greatly reduced, which can provide a quieter working environment.

High durability

No mechanical wear: no mechanical friction, reducing the wear parts of the equipment, making the service life of the magnetic suspension blower longer, generally up to more than 20 years, which is greatly increased compared with the traditional blower.

Stable operation: the magnetic bearing can monitor and adjust the position of the rotor in real time, ensure that the rotor is always in a stable suspension state, make the fan run more stably and reliably, and reduce the damage to the equipment caused by vibration and other factors.

Low maintenance cost

No need for lubrication and maintenance: the magnetic suspension bearing does not need lubricating oil, which saves the maintenance work of adding lubricating oil, grease and other consumables regularly and checking and replacing parts such as transmission belt in traditional fans, which not only saves maintenance costs, but also avoids environmental pollution caused by lubricating oil leakage and other problems.

Easy-to-replace parts: Daily maintenance only needs to replace the two-stage air filter at the air inlet according to the prompt of the fan, which is simple and convenient to operate, and the replacement cost of the filter and other parts is relatively low.

High integration: The imported filter device, cooling system, automatic anti-surge system, power failure and fault protection system are all designed in a unified and integrated way, so users do not need to purchase other parts, which reduces the installation and debugging of equipment and improves the overall reliability of the system.

Remote monitoring and operation: With the advanced control system, not only can the real-time remote monitoring of the running state of the blower be realized, but engineers can also remotely observe the running state of the blower online, conduct remote debugging and fault diagnosis. Once the blower is abnormal, it can be found in time and corresponding treatment measures can be made, which greatly improves the convenience and response speed of after-sales service.

Convenient installation: it belongs to the box structure, and adopts self-balancing technology and active vibration reduction design. The installation of machinery and equipment does not need special installation foundation, and it can usually be installed on a horizontal road surface, which reduces the requirements for installation environment and saves installation time and cost.

High cooling efficiency: the cooling system usually adopts the combination of air cooling and self-circulating water cooling, which can effectively reduce the temperature of the motor, avoid the damage caused by the heat of the permanent magnet motor, prolong the service life of the permanent magnet motor and improve the stability of the machinery and equipment.