The service life of air suspension blower is affected by a variety of factors, generally in a good use environment and correct maintenance, its service life can reach 10 years or even longer.

First, the impact of key components

1. Impeller: Impeller made of high-strength aluminum alloy or titanium alloy, with good corrosion resistance and mechanical strength. If the air in the operating environment is relatively clean and regular maintenance is carried out, the service life of the impeller can reach more than 8-10 years. However, if the air contains a lot of dust, particles or corrosive substances, it will accelerate the wear of the impeller, which may shorten its life to about 5-7 years.

2. Motor: high-quality motor with advanced frequency control technology, can achieve efficient and stable operation. Under normal working conditions, the service life of the motor is usually about 10-15 years. However, if the motor is often in the overload operation state, or the working environment temperature is too high, poor heat dissipation, the life of the motor may be greatly affected, reduced to 5-8 years.

3. Bearing: Air suspension blower adopts air suspension bearing, no mechanical friction, theoretically has a long service life. However, in actual use, if the gas supply system is unstable, resulting in insufficient air pressure or containing impurities, it will affect the suspension effect of the bearing, and then reduce the bearing life. Under normal circumstances, the service life of the bearing can reach about 10 years, but if it is not properly maintained, it may be shortened to 5-8 years.

Second, the use of environmental impact

1. Temperature: The appropriate operating temperature range is generally between -10℃ and 45℃. If the device is operated in a high temperature environment for a long time, the aging of the components will be accelerated and the service life will be reduced. For example, when the ambient temperature exceeds 45 ° C, the performance of the equipment may gradually decline, and the service life may be shortened by about 20%-30%.

2. Humidity: The air suspension blower also has certain requirements for the humidity of the working environment, and the general relative humidity should be below 80%. High humidity environment may cause electrical components to be damaged by moisture, but also affect the heat dissipation effect of the device, long-term in a high humidity environment, the service life of the device may be reduced by about 10%-20%.

3. Air quality: If the air contains a large amount of dust, sand, corrosive gas and other impurities, it will cause wear and corrosion of the internal components of the equipment. For example, in industrial environments with poor air quality, the filter of the equipment needs to be replaced more frequently, otherwise the intake quality of the equipment will be affected, and the service life of the equipment will be shortened, which may reduce it by about 30%-50%.

3. Maintenance impact

1. Regular maintenance: Perform regular maintenance according to the manufacturer's prescribed maintenance cycle, including cleaning filters, checking electrical systems, lubricating bearings, etc. Regular maintenance can detect and solve potential problems in time to extend the service life of the equipment. For example, cleaning or replacing the filter every 3-6 months can guarantee the quality of the intake air and reduce damage to the inside of the equipment.

2. Troubleshooting: When the equipment fails, timely and correct maintenance is essential. If the fault is not handled promptly or improperly, the fault may be extended, which seriously affects the service life of the device. For example, after the motor fails, if it continues to run forcibly, it may lead to the motor burning, which in turn affects the use of the entire equipment.

3. Operator training: Professional training for operators to familiarize themselves with the operation methods and maintenance points of the equipment, which can reduce equipment damage caused by improper operation. Proper operation and maintenance can effectively extend the service life of the equipment and improve the reliability and stability of the equipment.