Air suspension blowers have the following requirements in terms of use environment:

Temperature:

In general, the appropriate working environment temperature range is usually between -10℃ and 45℃. If the ambient temperature is too low or too high, the performance and stability of the device may be affected. For example, in extremely cold environments, the lubricating oil may solidify, causing the parts to run poorly; At high temperatures, electronic components may overheat and shorten their service life.

Humidity:

The relative humidity should be controlled below 80%. High humidity may cause electrical components to be damp, resulting in faults such as short circuits. For example, when used in a wet basement, special attention needs to be paid to moisture-proof measures.

Air quality:

Dust, impurities and corrosive gases should be minimized in the surrounding air. Dust and impurities may enter the fan and wear parts; Corrosive gases corrode the metal components and electrical contacts of the equipment. For example, when it is used in chemical industry areas, additional protective measures are required.

Installation space:

Sufficient installation and maintenance space is required to facilitate the installation, commissioning, and routine maintenance of the device. If the space is too narrow, the working efficiency of operators may be affected, and even normal maintenance operations cannot be performed.

Electromagnetic environment:

Avoid interference from strong electromagnetic fields, which may affect the normal operation of the device control system. For example, when used in areas close to large transformers or high-voltage power lines, there may be problems with signal interference.

Basic conditions:

The installation foundation should be stable and able to withstand the weight of the fan and the vibration generated during operation. Otherwise, the operation of the device may be unstable, resulting in excessive noise and vibration.

To sum up, in order to ensure the normal operation and long life of the air suspension blower, the above environmental requirements must be met.