In the daily use of maglev blowers, the following issues need to be noted:

Before starting:

1. Check whether the power supply voltage is normal and stable.

2. Confirm that the inlet and outlet pipes are properly connected and firmly without leakage.

3. Check whether the display of each instrument is normal.

In operation:

1. Observe the operating status of the blower, including the speed, wind pressure, current and other parameters within the normal range.

2. Monitor whether there is abnormal noise or vibration. If there is abnormal, stop the machine in time for inspection.

3. Avoid frequent start and stop; otherwise, the service life of the device is affected.

4. Pay attention to the temperature of the device to ensure that the cooling system works normally.

Daily maintenance:

1. Clean or replace the air filter at specified intervals to ensure the quality of the intake air.

2. Periodically check the fastening of each component to prevent loosening.

3. Keep the environment around the device clean to prevent impurities such as dust from entering the device.

4. Record the running data of the device to identify potential problems in a timely manner.

5. Pay attention to the humidity and temperature of the device to avoid long-term operation in harsh environments.

6. Train the operators to ensure the correct operation and maintenance of the equipment.

For example, when cleaning the air filter, it is necessary to strictly follow the operating procedures to avoid damaging the filter; When recording the operating data, it should be accurate and detailed, such as the specific parameter values at a certain time on a certain day, so that it can be better analyzed and compared.