What are the causes of the damage to the bearing of the air suspension blower?

Through the combination of air suspension technology, intelligent control system, efficient motor technology and structural design optimization, the air suspension blower has obvious advantages in environmental protection, energy saving, low maintenance cost and stable operation. However, in the process of use, if improper use occurs, it may cause damage to the bearing of the air suspension blower. So, what are the reasons for the damage to its bearings?

Jiangsu Weigu fluid - air suspension centrifugal blower

Overload operation

Overload operation will cause the air suspension blower to bear more force than the designed load, resulting in increased pressure and friction on the bearing, resulting in bearing damage. At the same time, it will also lead to an increase in friction between the rotor and the bearing, which intensifies the wear of the bearing and reduces the service life of the bearing. Due to overload operation will lead to excessive heat generated during the operation of the equipment, which also invisibly improves the working temperature of the bearing, and long-term high temperature will damage the lubrication performance and hardness of the bearing, accelerating the aging and damage of the bearing.

In order to avoid damage to the bearing of the air suspension blower caused by overload operation, the operator should comply with the rated load and working parameters of the equipment, regularly check the operating status of the equipment, avoid overload operation, and keep the equipment operating within the normal working range to extend the service life of the bearing and ensure the stable operation of the equipment.

Excessive vibration

Excessive vibration will lead to uneven stress on the bearing surface, which may cause local wear and damage to the bearing surface, further affecting the stability and life of the bearing. At the same time, excessive vibration will affect the stability of the air suspension blower, which may lead to unstable operation of the equipment, and then aggravate the wear and damage of the bearing.

In order to avoid excessive vibration resulting in damage to the bearing of the air suspension blower, the operator should regularly check the vibration of the equipment, while maintaining the cleaning and maintenance of the equipment, and extending the service life of the bearing.

Dust and pollutants enter

Dust and pollutants entering the bearing will increase the operating resistance of the bearing, affect the normal operation of the bearing, make the bearing bear additional force, and accelerate the damage of the bearing. At the same time, it will also cause the friction heat inside the bearing to increase, making the working temperature of the bearing rise, accelerating the aging and damage of the bearing.

In order to avoid dust and pollutants entering the air suspension blower bearing damage, the operator should keep the surrounding environment of the equipment clean, regularly clean the surface and surrounding area of the equipment, ensure that the equipment is in a clean working environment, prevent dust and pollutants from entering the bearing interior, so as to extend the service life of the bearing.