How should we repair the air suspension blower after it fails?

Weigu Fluid Technology (Jiangsu) Co., Ltd. is a professional blower manufacturer adhering to the industrial design concept, committed to the aerodynamic system and equipment technology research and development, production, sales, system transformation and maintenance and other one-stop service. The main products are screw blower, screw vacuum pump and Roots fan, Roots vacuum pump air suspension blower, magnetic suspension blower and other products installation sales and equipment maintenance services, hotline: 4001157768 Welcome to call to inquire!

When the air suspension blower fails, it needs to be repaired according to the following steps:

Check whether the connecting bolt of the blower is loose, whether the splint is loose, whether the cable is displaced, and whether the sensor ring is worn or broken, while checking whether the oil level of the hydraulic oil and the gearbox is uniform, whether the gauge pressure of the hydraulic station is normal and so on.

Check whether there is a mushy smell in the control cabinet, and listen to the discharge sound in the control cabinet to see if there is a loose terminal or poor contact. At the same time, check whether there is abnormal noise between the yaw sound, the generator bearing, the gearbox, the brake disc and the pad, and whether the wind of the wind blade is normal.

Check the control panel for error codes and locate the problem based on the error codes.

According to the type of fault, the corresponding repair method may need to replace the damaged parts, repair the circuit or adjust the mechanical parts, etc.

After the repair is completed, the blower should be tested to ensure that it can operate normally and that similar failures do not occur.

It should be noted that the air suspension blower is a high-performance equipment, and its maintenance requires professional technology and experience, so it is recommended to seek professional technical support and guidance when maintenance.