How to install the air suspension blower to meet the site requirements

In the designated place (air room) installation of air suspension blower, is to ensure that the environmental quality in the place can be improved, and in the process of air suspension blower device may encounter some problems, so we summarized for you some air suspension blower device requirements, users can according to the following device to clarify, More knowledge of fan equipment.

Before understanding the installation of the air suspension blower, let's first understand the several components of the air suspension blower. The air suspension blower is mainly composed of: impeller, motor, bearing, controller and frequency converter, which are indispensable in the device

Installing products in unsuitable locations can reduce life and performance. The following should be considered before installation:

(1) The operating temperature range of the product is between -20 degrees Celsius and 40 degrees Celsius. If it is installed in a place where the temperature continues to drop below -20 degrees Celsius, it is necessary to install a fan in a place that can be heated.

(2) Installed in a relatively clean, well-ventilated room that can provide enough space for product maintenance. Do not install the fan outdoors, where it can come into contact with rain, snow and a lot of moisture.

(3) In order to ensure maintenance space and smooth air circulation, the blower should be installed at least 1 meter away from the wall or other products.

(4) If the blower is installed in the following places, please make an agreement with the manufacturer before installation.

- Where there's a lot of salt in the air

- Where corrosive gases are in the air

- Where there is a lot of dust or sand in the air

Because the humidity is too high, it will cause corrosion or leakage of the operating part, please avoid places with moisture, and ensure that the foundation, cable trench setting, and power cable basic facilities are in place. It is normal for the fan to have a slight sensation and noise after starting.