Jiangsu Weigu fluid introduction: What are the components of the screw blower?

Jiangsu Weigu fluid Roots fan to introduce you, what are the components of the screw blower?

Screw blower is a kind of fan equipment commonly used in the industrial field, its main components include the following aspects:

1. Motor: The power device used to drive the fan operation, usually AC motor or DC motor.

2. Blower shell: usually welded by steel plate, as the external protection structure of the blower, but also play the role of wind conductivity, sound insulation

    and vibration reduction.

3. Screw: Screw is the core component of the blower, composed of screw shaft and screw blade. The screw blades are arranged in a spiral shape, which can 

    produce gas inhalation and discharge when rotating.

4. Air inlet: an inlet used to introduce gas, usually equipped with a screen to allow impurities to enter the inside of the blower.

5. Exhaust port: used to discharge the compressed gas of the blower, usually equipped with a muffler, which plays an important role in reducing noise.

6. Control system: includes electrical control part and automatic control part, which is used to monitor and adjust the operating status, speed and other

    parameters of the blower.

7. Cooling system: The heat generated when the blower works. The cooling system is used for heat dissipation to ensure the normal operation of the blower.

8. Other components: such as bearings, seals, transmission devices, etc., are used to support and connect various components to ensure the normal operation

    of the blower.

Please note that the above is a part of the general screw blower, the specific model and each manufacturer may be different, but also need to be combined

    with the actual situation for specific analysis.