Why do air suspension blowers last

 The air suspension blower is a kind of blower in which the air rotates at high speed in the blower rotor, and the dynamic pressure effect is generated between the rotor and the foil bearing surface, forming a high pressure air film and floating the rotor. This design reduces mechanical losses, improves energy efficiency, and reduces the possibility of component wear and failure, improving the durability and stability of the equipment. Air suspension blower through the non-contact, frictionless operation mode, reduce mechanical wear, so that it has more durable characteristics, which also makes air suspension blower in industrial applications favored. Air suspension blower No contact, no friction: The air suspension blower adopts gas dynamic pressure technology, so that the rotor has no contact with the bearing and no friction during operation. In contrast, traditional fans use mechanical bearings, and friction can lead to bearing wear and fatigue, thereby reducing the life of the fan. Reduced mechanical wear: Since air suspension blowers do not require mechanical bearings, the possibility of mechanical wear is reduced. During the long operation of traditional fans, mechanical bearings will need regular maintenance and replacement due to friction and wear, while air suspension blowers do not need such maintenance. High-speed balance: The rotor of the air suspension blower is suspended in the air, not limited by mechanical bearings, and has a high rotational balance. This means that when rotating at high speed, the vibration and imbalance of the air suspension blower is smaller, reducing the impact and damage to the equipment. High efficiency and energy saving: The air suspension blower uses advanced bearing technology and control system to achieve higher energy efficiency. In contrast, traditional fans are less efficient due to friction and energy loss. High energy efficiency can not only reduce operating costs, but also extend the service life of the equipment. Air suspension blower Air suspension bearing technology: Jiangsu Weigu air suspension blower is equipped with air suspension bearings imported from South Korea, which replace traditional mechanical bearings by air suspension bearings. Compared with traditional bearings, air suspension bearings have lower friction loss and energy loss, which can greatly reduce energy consumption. High rotation efficiency: Because there is no friction loss of mechanical bearings, the rotation efficiency of Jiangsu Weigu air suspension centrifugal blower is higher. The ability to more fully convert electrical energy into mechanical or airflow energy and transfer it to the air being supplied. Therefore, under the same air volume and air pressure, the air suspension centrifugal blower can complete the work more efficiently than the traditional blower, and the product is more durable. Frequency conversion speed regulation technology: Jiangsu Weigu air suspension centrifugal blower adopts well-known brand high-speed inverter, high efficiency, stable and reliable. By adjusting the speed of the motor, the precise control of air volume and air pressure is realized. Compared with the blower running at a fixed speed, the variable frequency speed regulation can be adjusted according to actual needs, avoiding additional energy waste, making the product not only more durable, but also more power-saving. Intelligent control system: Jiangsu Weigu Air suspension centrifugal blower is equipped with an intelligent control system, which can accurately monitor and control the operating status and air volume output of the blower. When the working load is light or full power output is not required, the intelligent control system can automatically adjust the operating parameters of the blower to further reduce energy consumption.